Por si no lo conocíais os dejo esta otra chuche de HK:
http://www.hobbyking.com/hobbyking/store/__44327__tarot_t_2d_gopro_3_brushless_camera_gimbal_and_zyx22_controller.htmlFeatures:• Vibration isolation mounting
• Integrated motor and frame design
• GoPro 3 direct mounting
• Supply voltage polarity protection and voltage compensation
• Short-circuit protection
• Custom initial pitch angle
• Sensitivity parameter adjustment support and software
• Supports joystick rate mode and position mode
• Dual 32-bit high-speed ARM core processor
• Easy to use software
Specifications:Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Working current: 200mA-500mA (power supply voltage and the motor related)
Working temperature: -15c ~ 65c
Processor: Dual 32-bit high-speed ARM core processor
Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers
Maximum angular rate: 2000 ° / Sec
Maximum acceleration: 16g
Control frequency: 2000Hz
Motor drive frequency: 20KHz (no noise smoothing drive)
Control accuracy: 0.1 deg
Control angle range: -45Deg ~ 45Deg (roll), -135 ° ~ 90 ° (tilt)
Power Interface: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Camera equipment:GOPRO Hero3 (not included)
Includes:ZYX3 rotor gyro USB cable group × 1
GOPRO two-axis gyro sensor head × 1
GOPRO two-axis gyro head master controller × 1
USB computer interface x 1
T-2D gimbal with motors and isolated mounting
ZYX22 brushless gimbal controller
Related hardware