Nuevo Tanque de Kevlar para helicopteros de gran escala

[madcortina]

Kevlar tank set for the large 1:4 scale Vario LAMA

This is the ultimate fuel tank system for any owner of the large turbine Lama from Vario.
This allow you a direct replacement from the stock plastic jugs based tanks, and to suppress the fuel restriction and its associated downsides.
The volumes have been designed to use the existing plywood supports, while increasing the capacity and preserving the access to other components.
Both tanks are linked by a cross-feed system allowing a parallel setup rather than the serial setup of the stock tanks.
Beside its outstanding mechanical properties, the Kevlar let you directly see the fuel level by transparency, on the ground as in the air.
A fiberglass version is also available, should you wish to paint the tanks. You could also leave a clear strip in the paint to use it as a fuel gauge.
Each pair of tanks is delivered assembled with our CNC cap, tested, and in a ready to fly status prior to shipping.

Technical specifications
Kevlar / Carbone structure
-CAD designed, CNC machined molds
-Asymetrical design for capacity optimisation
-No C.G. shift
-5° inclination for bubble clearance
-Integrated emboss for fixation strap
-Ultimate resistance against punching and tearing
-High fueling pressure resistant
-Ultra low restriction to depression.
-Large flow crossfeed installed as stock feature
-Mil-spec F1003 fluorosilicone O-ring, specific for kerosene exposure
-Festo PK4/QS4 fittings, Loctite 648 secured
-8 points fixation for a warp free door, and an evenly spread pressure
-Din 912 E4 quality stainless steel hex screws
-Tygon F4040 pickup line
-Extra heavy clunk
-Easy maintenance thru a 40mm diameter acsess.
-ChemRez epoxy resin, laminated à 60°C
-Single tank capacity: 1750ml
-Total combined capacity L+R: 3300ml
-Direct see thru fuel level vision
-Runtime: 20mn with a Jakadofsky Pro Edition or Pro 5000 engine
-Alternate fitting available on custom order

KEVLAR version – pair, ready to fly: 390€

FRP version – pair, ready to fly: 370€

Click HERE to download the Lama Tank set instructions.

Click HERE to visit the RPM-Aerotechnique website, just press the Contact button to send Remi a message for your order.

[ADominguezt]

Gracias Mad, el mío es el BIG LAMA; pero miraré las medidas a ver que tal o le escribiré al fabricante a ver si tiene para el BIG