Os dejo un poco info (en ingles, sorry) de la nueva emisora que en breve sacara Futaba al mercado, una interesante opcion con un precio contenido.
Pro-level features at a sport system price! 
It’s the perfect system for the price-conscious pilot needing pro-level features; one that offers far more than modelers would expect, for less than they’d ever imagine. The 10C includes features formerly found only on Futaba’s most advanced systems like intuitive Dial’n Key™ programming and joystick navigation; Basic and Advanced menus allowing you quick access to the most used menus; programmable mixes and more. But it also offers features that our competition does not in this price range: Features like logic switches; 7-point throttle curve and two gyro settings for airplanes; 7-point throttle and pitch curves and four flight modes for helis Expanded sailplane features that include butterfly-to-elevator mix, as well as spoiler and motor cut menus are also featured. Another plus is a feature that automatically conserves power by turning off the backlight during periods of inactivity. The FASST version is complete with the R6014FS 14 channel receiver – the same receiver found in our top of the line systems (12FG, 12Z and 14MZ).
10C Overview: - Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off
- Dial’n Key™ programming with joystick navigation
- 15-model memory (expandable with optional CamPACs)
- Ten character user name
- Ten character model name
- Basic and Advanced menus
- Enhanced airplane, heli and glider software
- “Logic Switches” activate a new condition if specified switch positions occur
- Up/down, on/off timer (activated by stick or switch)
- Tracks service hours for radio and models
- Mode 1-4 selectable (Modes 3 and 4 programmable)
- Assignable functions/switches
- Auxiliary channel screen for 1-step function/switch assignment and eliminating unused auxiliary functions
- 2 proportional slider switches
- Digital trims on all 4 main channels
- Trim memory and sub-trims
- Adjustable trim steps (1-40)
- Fail-safe, servo reversing and EPA
- “Full Functionality” trainer system (cord required)
- Flap switch (3-position)
- Retract switch
- Variable-rate knobs (3)
- Adjustable Throttle Cut/Idle Down
- Sticks with length and tension adjustments
- 1024 resolution
- Servo cycle with bar graph displays
- Constant trim, voltage, name and timer display
10C specifics: - Advanced Airplane Menu (16) with eight programmable mixes (four linear/four with 5-point curves)
- Nine factory-defined mixes: Elevator-Flap;, Ailevator; Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake with elevator delay
- Two independent gyro settings
- Seven-point throttle curve
- Flap trim
- Two-rate gyro system
- Dual/triple rates (3 channels) Aileron, Elevator, Throttle, Rudder
- Exponential (3 channels) Aileron, Elevator, Throttle, Rudder
- Idle down
Advanced Heli Menu (19): - Accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 conditions and automatically changes all three with a change in condition.
- Six programmable mixes (four linear/ two 5-point curves)
- Eight factory-defined mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor: Offset: Revo (5 point); Delay; and Throttle (aileron/elevator/rudder)
- Gyro menu
- Eight swash plate types
- Swash plate AFR
- Four 7-point throttle and pitch curves with delay (N, 1, 2 and 3: +/-100%)
- High/Low pitch setting
- Three adjustable idle-up conditions and normal condition
- Throttle Hold and Idle-up with delay
Advanced Sailplane Menu: - Eight programmable mixes (four linear/ four 5-point curves)
- Twelve factory-defined mixes: Butterfly-Elevator (2); Elevator-Flap (0-100%); Camber (with aileron/elevator/rudder adjustment); Aileron-Flap (0-120%); Aileron-Rudder/ Flaperon; V-tail: Flap Trim; Butterfly with spoiler adjustment and 4-point Offset (with camber adjustment for basic/launch/thermal/speed)
- Adjustable spoiler
- Adjustable throttle cut
- Single/Dual Flap servos
- Start, speed, distance and landing conditions
- Adjustable motor cut FUTK9250 10C R6014FS Air 2.4GHz Mode 2 Retail:$899.99 Street:$599.99
FUTK9251 10C R6014FS Heli 2.4GHz Mode 2 Retail:$899.99 Street:$599.99
FUTK9252 10C R6014FS Air 2.4GHz Mode 1 Retail:$899.99 Street:$599.99
FUTK9253 10C R6014FS Heli 2.4GHz Mode 1 Retail:$899.99 Street:$599.99
AVAILABLE: End of April
For more information please visit:
http://2.4gigahertz.com 
Dilber MC Theme by HarzeM modified by Madcortina