Bienvenidos a Helicopteros RC / Radiocontrol
• 1520/760: This represents the frame rate of the rudder servo used. Most commonly used analog or digital servos use the 1520us frame rate. 760us rate is used specifically for high frequency servos such as Futaba 9256 and BLS251. If unsure, always set this option to 1520us to avoid burning out your servo. 1520us is also the factory default settings.• DS/AS: This sets the gyro for either Digital Servo or Analog Servo. DS is the factory default setting.• NOR/REV: This sets the compensating direction for the gyro.• Limit: This setting limits the rudder servo travel and is used to avoid binding in the tail linkage.• Delay: This is the setting used to dampen the gyro compensating speed for slower servos that are unable to keep up, resulting in tail oscillation. There is also an imbedded setting for the size of helicopter used. Small includes 250/450 size, while large includes 500/600/700.
Yo de todas maneras también te digo que a pesar de tener dos 401, mi próximo gyro será un GP750... (para mi futuro 250)