Hola, espero que esto te sirva.
http://www.natew.com/rcheli/frame_main.cgi/html.FutabaSecretMenus Ocultos:
Ver 1.20 software version?
PHis 0.6% Proportional something?
IHis 0.8% Integral somthing? history?
G 42%/50% balance can be adjusted 1-for-1 with +/- keys, but
what does G stand for?
Maybe it's Proportional vs. Integral gain balance,
is that what Bob P was needing?
IGa 1.7% Integral Gain?
GDan 00%
GC8->100% not adjustable from front panel - tx maybe?
(I'm wishing I'd had the Tx with me when i was
documenting the GV-1, I suspect the "8" would
vary with one of the input channels...)
GCo- 0%
ICo- 50%
LmHV 20%
GLmt 35% could this be the minimum throttle setting?
LmSt 50%
TAdL 30% travel adjustment low? 30% coincides with Futaba
Tx minimum
TAdH 90% ok, maybe not
Gov ACT switches ACT/INH with data keys: Governor Active /
Inhibited?
Smpl 1Fr sample N frames (of what?)
AVR. 7t average over N passes to determine speed?
FLT. 4n
Dlay 3us Delay (of what?)
OnRv 70% Governor turns on when actual RPM reaches this
percentage of desired RPM
Wait 2Fr skip a couple frames before... hm?
DlUP 3S Delay when raising speed - allow N seconds to
reach new speed
DlDN 5S Delay when lowering speed - allow N seconds to
reach new speed
LDl 100 Fr something-delay, 100 frames?
RAdj INH toggles ACT/INH with data keys
RESET blinking restore factory defaults, probably