JR TAGS01 3-axis gyro
JR Propo released more information about their FAGS01 3-axis gyro that is available now. The flybaress system recognises the CCPM settings that are set in the transmitter meaning there is no need to change the CCPM settings in the transmitter when installing the TAGS01 although a quick calibration is be required to make the unit working properly. The basic settings can be intuitively carried out using only the switches and dials of the control unit with more finely detailed adjustments and access to additional functionality is available when using a PC and the optional interface cable and software. This also allows for easy firmware updates of the gyro. The TAGS01 will also be available with JR’s .50 and .90 size flybarless rotor head assemblies for the Airskipper 50 TypeII, E8, Vibe90SG, Airskipper 90, Airskipper E12 and Shylphide E12 helicopters.
Specifications
- Supported Control Systems: Mechanical mix swash plate systems and all three servo CCPM swash systems are supported
- Number of receiver channels used : 4ch-7ch (Swash 3ch + Rudder 1ch, Gain 0ch – 3ch)
- Voltage range: 4.8V – 8.5V
- Dimensions and weight control unit: 37.0×55.0×11.5mm/Weight 22g
- Dimensions and weight sensor: 27.0×10.3mm/Weight 16g
- Recommended Servos: See JR Propo’s recommended servo chart
Fuente:
http://blog.flying-hobby.com/rc-news/jr-tags01-3-axis-gyro
