¿Habéis visto esta radio? Mutiprotocolo (menos Fasst, todos) y de tamaño dicen que entre una futaba 18SZ y la 18MZ, es openTx con botones especiales para el y flipad con el precio........ 149 dolares , 132 euros en Bangood.
https://www.banggood.com/es/Jumper-T16-2_4G-16CH-Open-Source-Multi-protocol-Radio-Transmitter-w-JP4-in-1-RF-Module-Compatible-JumperTX-OpenTX-p-1430042.html?rmmds=newArrivals&cur_warehouse=CNhttps://www.getfpv.com/jumper-t16-open-source-multi-protocol-radio-transmitter-jumpertx.htmlhttps://www.flyingtech.co.uk/electronics/jumper-t16-opentx-multi-protocol-radio-transmitterhttp://www.multirotorguide.com/news/jumper-t16-transmitter-jumpertx-color-lcd-multiprotocol-radio/T16 Basic Specifications:
Size: 180*190*58
Weight: 798g (with 2 x 18650 batteries installed)
Voltage: DC7-8.4V
Battery: 2 x 18650 (tray supplied) or 2S lipo (Lipo not included)
Current: 350mah (NO CRSF)
Channel: 16ch
T16 Features:
STM32F429BIT6 MCU
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Compatible with JumperTX and OpenTX firmware
Wheel menu button
Angle adjustable ultra-smooth dual bearing gimbals
Multi-protocol transmitter module with TBS CRSF support
Removable battery
Supports Telemetry
Memory 16M (can be expanded by TF card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display
Jumper JP4-in-1 Module
The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also upgradable via USB input
JP4-in-1 Specifications:
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.
RF Chip Data
Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futaba SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
Includes
1. T16 Radio
2. JP4-in-1 Multi Module
3. USB cable
4. 18650 tray
5. Throttle return springs and parts
6. Neck strap
7. Throttle spring adjustment set
no consigo poner as fotos ni por enlaces no se que pasa
Aqui la foto comparativa con el tamaño de otras radios.
https://scontent.fjed4-1.fna.fbcdn.net/v/t1.0-0/s261x260/53057916_2630661213670417_3939876622785576960_n.jpg?_nc_cat=107&_nc_ht=scontent.fjed4-1.fna&oh=99323faf8656042371f3d9672b543e55&oe=5D188B40
Dilber MC Theme by HarzeM modified by Madcortina