|
Título: Nuevos receptores Futaba R6014HS - R6008HS - R6004FF Publicado por: aspim en 25 de Marzo de 2009, 11:34:26 Creo que nadie hizo mención a estos receptores...
Casi no encontré información todavía de ellos en Internet y por supuesto en la Web de Futaba na de na, quitando el más pequeño... El R6004FF es un receptor de 4 canales, micro y de solo 3.8g (http://www.keimod.com/shop/images/products/radio-accessories/receivers/Futaba-R6004FF.jpg) Citar This is the Futaba R6004FF 2.4GHz FASST 4-Channel Micro Receiver. Compatible with the following FASST transmitters; 6EX, 7C, and the following transmitter modules; TM7, TM8 (on 7 channel mode), TM10 (on 7 channel mode) and TM14 (on 7 channel mode). FEATURES: * Designed for short range application such as indoor aircraft only * Limited flight range of 300 ft (91.4m) maximum * Compatible with standard size connectors only * Easy one touch linking to transmitter INCLUDES: Futaba R6004FF 2.4GHz FASST 4-Channel Receiver with set up sheet SPECS: Dimensions: 0.81 x 1.39 x 0.30" (20.5 x 35.3 x 7.5mm) Weight: 0.13oz (3.8g) Power Requirement: 4.0V- 8.5V F/S and Battery F/S function (for channel three) Battery F/S Voltage: 3.8V Approximate range of 300 ft (91.4m) El R6008HS es un receptor de 8 canales que por lo que entiendo tiene dos modos de funcionamiento, y en modo digital del canal 1 al 6 emite pulsos de 7ms en lugar de 14ms, para servos digitales. (http://www.keimod.com/shop/images/products/radio-accessories/receivers/FutabaR6008HS.jpg) Citar This is the Futaba R6008HS 2.4GHz FASST 8-Channel Park Flyer to Giant Scale Aircraft Receiver. R6008HS is a new version 2.4Ghz Receiver from Futaba. It could beoperated in Normal Mode or High Speed mode. The Normal Mode accepts anytype of servos or the peripherals as the frame rate of the output is14ms. The High Speed Mode accept the digital servos for outputs from1ch to 6 ch, including BLS Series, and most peripheral equipments suchas the gyro or brushless ESCs. The frame rate of the outputs is 7ms. The R6008HS is comptaible with the Fasst Transmitters with TM8 ( on 8Ch mode), TM10 (on 10Ch Mode), TM14 (on multi-ch mode) Spec 2.4Ghz SS Dual antenna diversity Power requirement: 4.8V or 6.0 V battery or regulated output from ESC Dimensions: 24.9 X 47.3 X 14.3 mm Weight: 13.5 g Por último el R6014HS es similar al de 8 canales pero con hasta 14 canales (según la emisora que se use) y también preparado para pulsos de 7ms en los canales 1-6. (http://www.keimod.com/shop/images/products/radio-accessories/receivers/FutabaR6014HS.jpg) Citar This is the Futaba R6014HS 2.4GHz FASST 14-Channel Receiver. R6014HS is a new version 2.4Ghz Receiver from Futaba. It could beoperated in Normal Mode or High Speed mode. The Normal Mode accepts anytype of servos or the peripherals as the frame rate of the output is14ms. The High Speed Mode accept the digital servos for outputs from1ch to 6 ch, including BLS Series, and most peripheral equipments suchas the gyro or brushless ESCs. The frame rate of the outputs is 7ms. The R6014HS is comptaible with the Fasst Transmitters with TM8 ( on 8Ch mode), TM10 (on 10Ch Mode), TM14 (on multi-ch mode) Spec 2.4Ghz SS Dual antenna diversity Power requirement: 4.8V or 6.0 V battery or regulated output from ESC Dimensions: 52.3 X 37.5 X 16.0 mm Weight: 20.8 g La fuente de donde saqué la información es una tienda, exactamente: http://www.keimod.com (http://www.keimod.com) --> Sección: Radio Accessories >> Receivers Título: Re: Nuevos receptores Futaba R6014HS - R6008HS - R6004FF Publicado por: HiNote en 25 de Marzo de 2009, 13:22:01 Muy interesantes estos receptores HS.
|