Título: H800 Camera Helmet HC8013 para el Trex 800E Publicado por: madcortina en 09 de Junio de 2013, 18:24:50 Aquí tenéis el ultimo producto liberado para el T-REX 800E....
Instructions: ●Designed specifically for the G800 gimbal, this unique ABS constructed gimbalsphere features bright yellow color for excellent visibility, high durabilityand impact resistant, offering superior protection for camera equipment. Whenadded to T-Rex 800E aerial photography ship, this G800 gimbal sphere will incura mere 500g of additional weight. The front, back and bottom of sphere isdesigned for quick disassembly, simplifying camera installation. ●Suitable for T-REX 800E Helicopter series. ●Quick disassembly design, as long as a few screws can fast install and remove for convenient to maintenance. ● Must be tied in with G800 Gimbal (H80B001XX). Specification: ●Body length:245.7mm ●Body width:209mm ●Body high:225.7mm ●Weight:Approx. 500g Accessory: ●H800 Cameral Helmet x 1 set ●Helmet Front Lid – Red x 1 ●Helmet Rear Lid – Red x 1 ●Helmet Bottom Hatch x 1 ●Gimbal Intensifier x 2 ●Gimbal Bottom Plate Aluminum Standoff A × 4(Φ8.9x12mm) ●Gimbal Bottom Plate Aluminum Standoff B x 4(Φ8x17mm) ●Gimbal Bottom Plate Aluminum Standoff C x 4(Φ8x22mm) ●Gimbal bearing block spacer-Black x 8(Φ5.2x13x4.5mm90°) ●Gimbal bearing block spacer-Red x 8(Φ5.2x13x4.5mm80°) ●Gimbal bearing block spacer-Gray x 8(Φ5.2x13x4.5mm70°) ●Flat Head Socket Cap Screw-Black x 2(M3x8mm) ●Socket screw-Black x 2(M3x10mm) ●Washer x 2(Φ3xΦ8×0.6mm) ●Socket Button Head Screw x 4(M3x5mm) ●Flat Head Socket Cap Screw-Silver x 4(M2.5x10mm) ●Locking nut(M2.5) x 4 ●M3 CNC socket collar screw x 2 ●Locking nut(M3)x 2 ●Set screw x 8(M3x8mm) ●Allen wrench x 1(2.5mm) ●Allen wrench x 1(1.5mm) ●Allen wrench x 1(2mm) ●T43 thread lock x 1 http://www.alignrcusa.com/index.php?main_page=product_info&products_id=2765 (http://www.alignrcusa.com/index.php?main_page=product_info&products_id=2765) (http://www.rcheliresource.com/wp-content/uploads/2013/05/RCHR-A1b-H800-CH-HC8013.jpg) |