Hitec presenta su nueva Emisora Aurora 9, Hitec RCD Germany a sacado en su nuevo catalogo del 2009 este nuevo sistema junto con sus accesorios.
Caracteristicas (traducidas del Aleman):
Adaptive Frequency Hopping Spread Spectrum Technologie (AFHSS)
The HiTEC 2.4 GHz system uses the newest AFHSS technology. The exclusive SmartScan system guarantees that you always have the optimum connection between transmitters and receivers. If you wish, the SmartScan function scans the 2.4 GHz the frequency band each time the unit is powered on around the range to find, within which the few frequencies are occupied. Thus the troublefree operation is always ensured.
Boosted Omni Directional Antenna (BODA) System
OPTIMA Full band AFHSS 2.4GHz receiver possess HiTEC’s exclusive BODA receiver technology. Intensive tests showed that the system of the individual BODA is at least just as good antennas in our 6 and 7 channel receivers as the dual antennas of comparable systems. The OPTIMA 9 channel receiver however has two BODA system antennas in the Diversity-Betrieb to work: the additional plus and security for your larger models.
Telemtry System The new bi-directional OPTIMA Full band AFHSS 2.4GHz receiver offers in series a warning system by the transmitter, during under-voltage of the receiver current supply and before excess of the range. Future sensors (e.g. GPS, RPM, Altitude, temperature) will be available. This information will transfer 24 AFHSS 2.4GHz telemetry module to the SPECTRA and on the display of the AURORA 9 or on a PC attached to the transmitter’s HF-module.
Supplimentary Power Connection (SPC) The additional receiver power connection for more security. Since an automatic controller BEC offers too little security to many model construction amateurs, the OPTIMA receivers possess an additional power connection, to which the battery of an electrical model can be attached directly. Naturally also further a conventional 4-cell receiver pack (4.8 V) can be attached to the OPTIMA receivers. If both current supplies are used, then the Antriebsakku secures the function of the receiver, even if the Servos became the BEC of an engine automatic controller or the receiver accumulator overloads. At the same time you can supervise so the tension of the Antriebsakkus. In cases in those the BEC of the automatic controller or a receiver accumulator is sufficient, needs you no additional current supply over the Antriebsakku.
USA Pricing and availability has yet to be disclosed by Hitec RCD USA.
PDF con informacion sobre la nueva Hitec RCD Aurora 9 Transmitter PDF (http://www.rcheliresource.com/wp-content/uploads/2009/02/ht-a9-info.pdf)
(http://img253.imageshack.us/img253/5867/hta9tx.jpg)
(http://img253.imageshack.us/img253/9576/hta9tx2.jpg)
(http://img253.imageshack.us/img253/849/hta9tx3.jpg)
(http://img24.imageshack.us/img24/1703/hta9tx4.jpg)