Helicopteros Radio Control - RC - Radiocontrol
HELICOPTEROS => MINIS y GRANDES HELICOPTEROS ELECTRICOS => Mensaje iniciado por: HiNote en 26 de Julio de 2011, 21:46:47 pm
-
After 3-axis gyro debuted, T-REX600E PRO is the first promoted type, it has many latest designs, as expectation, these designs will be used to Align¡¦s entire series of helicopter, and come out many V2 versions in a short time. 700E V2, 700E F3C V2, 550e V2, 450PRO V2 have come out before the article published, now we are going to introduce the upgrade of T-RECX700E F3C V2 and V1.
(http://www.infinity-hobby.com/main/images/news/wpid-7003c001-2011-07-15-01-40.jpg)
There is no big difference between 700E F3C V1 and V2 from the above two pictures. The key point is the colored painting of canopy which is leading visual impression does not change, and so as the vertical fin. Therefore, they are almost the same at the first impression.
Rotor Head
The rotor head changes a lot, the adjustability of V2 is better than V1, and it is easy to configure the rotor head to the characteristics to your own preference
700E F3C V2
700E F3C V1 (http://www.infinity-hobby.com/main/images/news/wpid-kx018e11_f1-2011-07-15-01-40.jpg)
(http://www.infinity-hobby.com/main/images/news/wpid-kx018e06_4-2011-07-15-01-40.jpg)
The differences between V2 rotor head and 700 New Designed Main Rotor Head (HN7114)
Align had released 700 New Designed Main Rotor Head (HN7114) for 700E the other day, but V2 rotor head has slight differences, which is the direction of the washout base and the SF mixing arm is opposite. Because the previous long linkage rod of 700 New Designed Main Rotor Head (HN7114) is easy to make linkage rods interfere with the screws of SF mixing arm if the angle of cyclic is too big at negative pitch. Now the problem of interfering has been solved, therefore, the range of configuring of V2 will not be limited anymore.
V2
700E New Designed Main rotor Head (http://www.infinity-hobby.com/main/images/news/wpid-kx018e11_f1-1-2011-07-15-01-40.jpg)
(http://www.infinity-hobby.com/main/images/news/wpid-hn7114_1-2011-07-15-01-40.jpg)
Battery Mount
V2 is different from 700E. V2 continues to use the same design as 600E PRO, and the material is aluminum alloy.
V2 V1 (http://www.infinity-hobby.com/main/images/news/wpid-kx018e11_f3-2011-07-15-01-40.jpg)
(http://www.infinity-hobby.com/main/images/news/wpid-kx018e06_11_ch-2011-07-15-01-40.jpg)
Carbon Tail Control Rod
Align started to use carbon tail control rod from 700E F3C V1in order to less the vibration than steel rod, and provide precisely tail control.
V2 also use carbon tail control rod, but the difference is the amount of the tail control guide, V1 has two, while V2 has one.
It is an improvement for author, less friction between tail servo and tail rotor control arm is better. The author has a 700E F3C V1, and he/she found that there are two guides added between tail servo and tail rotor control arm. However, the two guides are not high as each other, so these two points cannot link to a line. The tail rotor is easy to flutter because the friction is too much. After the author fixes and adjusts the guides, the problem of fluttering has improved. V2 use one tail control guide and it can let the friction reduce to the minimum.
V2
V1 (http://www.infinity-hobby.com/main/images/news/wpid-kx018e11_f7-2011-07-15-01-40.jpg)
(http://www.infinity-hobby.com/main/images/news/wpid-kx018e06_8-2011-07-15-01-40.jpg)
Tail Box
V2 used brand-new tail box, the frame became thicker, and the quality became better, also, it is easier to take apart. Besides, there are abrasion-resistant pads in the port of linkage ball on tail pitch slider; it makes the metal linkage ball more durable.
V2
V1 (http://www.infinity-hobby.com/main/images/news/wpid-kx018e11_f9-2011-07-15-01-40.jpg)
(http://www.infinity-hobby.com/main/images/news/wpid-kx018e06_10-2011-07-15-01-40.jpg)
Frame
From the real product of 700E V2, the frame has little difference, which is that, the position of fixing Velcro blow the frame became double-hole. Also, the carbon fiber frame is bigger, so the structure will be better than V1.
Is the frame of 700E F3C V2 the same as 700E V2? The author thinks that the formal sale version may be the same.
V2
V1 (http://www.infinity-hobby.com/main/images/news/wpid-www_flickr-2011-07-15-01-40.jpg)
(http://www.infinity-hobby.com/main/images/news/wpid-h70041_1-2011-07-15-01-40.jpg)
These are the differences between T-REX 700E F3C V1 and V2. The other parts such as M1 slant main gear, mental elevator servo mount, mental rudder mount, carbon flybar paddle, F3C main blade, and MX700/470KV brushless motor, etc are totally the same. You can take a look on Align¡¦s website to see introductions of other products:
T-REX700E F3C V1 introduction:
http://www.align.com.tw/shop/product_info.php?cPath=22_25&products_id=3650 (http://www.align.com.tw/shop/product_info.php?cPath=22_25&products_id=3650)
T-REX700E F3C V2introduction:
http://www.align.com.tw/shop/product_info.php?cPath=22_25&products_id=3968 (http://www.align.com.tw/shop/product_info.php?cPath=22_25&products_id=3968)
This article is a brief introduction of the differences between V1 and V2, reference only, the real product please refer to Align.
Article Resource: RC Mania (http://www.rcmania.hk/2011/07/12702)
-
Estos de Align como siempre jugando con las segundas partes a los 6 meses, la verdad es que cara tienen una poca, en eso si que se distinguen de otros fabricantes con mas cache, eso si tambien con mayores precios....
-
Por una parte es una faena que a los 6 meses, tu heli pase a estar descatalogado, pero por otra parte, renovar y mejorar los helies es bueno. Favorece al mercado y a los compradores, que así pueden compar un heli mejor y renovado.
Prefiero que renueven catálogo cada 6 meses a que saquen un heli nuevo cada 2 años y no sigan lo que pide el mercado.
-
Prefiero que renueven catálogo cada 6 meses a que saquen un heli nuevo cada 2 años y no sigan lo que pide el mercado.
Estoy de acuerdo contigo, maestro, pero un algo como un "plan renove" estaría bien. Precios más competitivos para los que demuestren ser propietarios de la versión anterior al comprar las nuevas piezas. Ayudaría a que cambiásemos y nos mantendrían más contentos. Por desgracia en casi todo del que ya pagó no se acuerdan nunca.
Saludos
-
Estoy de acuerdo contigo, maestro, pero un algo como un "plan renove" estaría bien. Precios más competitivos para los que demuestren ser propietarios de la versión anterior al comprar las nuevas piezas. Ayudaría a que cambiásemos y nos mantendrían más contentos. Por desgracia en casi todo del que ya pagó no se acuerdan nunca.
+1
-
Es la política de Align, por eso venden tantos helis. La verdad es que jode que un heli nuevo se quede desfasado en unos meses.
-
Estoy de acuerdo contigo, maestro, pero un algo como un "plan renove" estaría bien. Precios más competitivos para los que demuestren ser propietarios de la versión anterior al comprar las nuevas piezas. Ayudaría a que cambiásemos y nos mantendrían más contentos. Por desgracia en casi todo del que ya pagó no se acuerdan nunca.
+1
+1
Tienes toda la razón, pero tristemente no suelen ser normales los planes renove...
Con cámaras de fotos, vídeo, PDA, tablets, portátiles, móviles y electrónica en general pasa lo mismo... Si quieres tener lo último, toca pasar por caja, aunque tengas 50 productos de la misma marca.
-
Eso seria lo ideal un plan renove, no esta mal que a los meses mejoren pero podrian dar alguna facilidad.
-
Como dice Hinote, esto pasa con todo. Anda que no jode gastarte 500€ en un móvil y ver que al poco tiempo la misma marca anuncia uno nuevo mejor que el que tienes.... por poner un ejemplo.
Creo que catalogar al V1 de "desfasado" me parece que es pasarse un poco creo yo. Que mas quisiera yo tener un heli desfasado de esos....
Es curioso que nos quejamos de marcas como Thunder Tiger, Hirobo, JR Propo, que sacan helis cada 5 o 6 años y que tardan mucho en sacar novedades y ahora que Align se pone las pilas y no para de sacar helis de todos los tamaños y constantemente upgrades para todos los gustos nos quejamos....
Si es que no sabemos lo que queremos!
Si el V1 funciona bien y estáis contentos con el, que mas da? Disfrutad lo coño, y no penséis en el V2!
Saludos.
-
Saludos.
Vaya, parece que no fui yo el único que se dió cuenta de este detalle... Jeje... como se entere Ramoncín... les manda a los de la SGAE .(http://www.helicopterosrc.net/richedit/smileys/Varios/12.gif)
(http://www.black-pro.net/topic/infdata/2474-0.jpg)