Helicopteros Radio Control - RC - Radiocontrol
ACCESORIOS => EMISORAS, RECEPTORES, SERVOS Y GIROSCOPOS => Mensaje iniciado por: RaPtor en 17 de Febrero de 2011, 19:20:13 pm
-
buenas, alguien sabe si hace falta el usb flash link para programar el spartan?? o se puede programar tal y como viene???
el que digo es este: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10484 (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10484)
salu2.
-
Compater murciano!! aki tienes un manual del spartan
http://www.hobbyking.com/hobbyking/store/uploads/567674313X105261X14.pdf (http://www.hobbyking.com/hobbyking/store/uploads/567674313X105261X14.pdf)
peeero, vas a necesitar una traductor de ruso... y no es coña
http://www.elpais.com/traductor/idiomas/espanol-ruso (http://www.elpais.com/traductor/idiomas/espanol-ruso)
http://traductor.babylon.com/ruso/ (http://traductor.babylon.com/ruso/)
Aqui tambien te pego un texto que he encontrado en ingles que no se si te ayudara:
• Clear user interaction through a three colour status indicator. Blue indicates normal operation, flashing red indicates error codes, violet indicates setup mode.
• The on-board push-button makes access to the setup easier. The old switch toggling method is still supported when the gyro is installed between the helicopter frames and the access to the push-button is not practical.
• Unfortunately due to physical size constrains the dedicated computer connectivity port had to be abolished. Computer connectivity is still possible through the Quark's gain plug which needs to be disconnected from the receiver during programming. An adapter (SRC-SLX) for the Flash-Link or Blue-Link is required.
Edito: mira, al final si que esta por ahi en ingles:
http://rc.runryder.com/helicopter/gallery/64200/quark_1v0.pdf (http://rc.runryder.com/helicopter/gallery/64200/quark_1v0.pdf)
y por lo visto tambien hay una manera de entrar al setup sin tocar el boton del gyro:
There's another way to enter setup mode not in the manual. Set your gain switch on your radio to be HH in one position and rate on the other and within 7 sec of powering up the heli toggle the switch back and forth quickly until it enters programming mode. This method works if you install the gyro in a location that you can't reach the button.
-
vale muchas gracias edicalpena, aun no lo he pedido pero me va a servir.
salu2
-
Hola!
Yo tengo ese giro y lo puedes programar perfectamente sin el USB link. Las instrucciones vienen en ingles, nada de ruso...
Por lo demás, pedazo de giro colega ;)
-
Tal como dice Pilotero ese giro se ajusta con los sticks de la emi no necesariamente hace falta el usb y en mi opinión es un gran giro.