Sale para competir con los Gyros Spartan y Futaba en area de los Gyros para Helicopteros 3D. Tambien tienen una version de 3 ejes flybarless que esta en pruebas.
Precio estimado:
159,99$ Gyro
19,99$ Programador
Pequeño video de Tim Jones probando el Gyro Cyclone:
http://www.rcheliresource.com/video-cyclone-gyro-testing/ Tiene dos modos de trabajo: Normal y AVCS (bloqueo)
- Production version is 7.2 grams (with servo leads)
- 4.8 to 10 volts
- will work with any servo Servo compatibility: 1520uSec and 760uSec
- Digital servos at 333Hz and 250Hz.
- Operating conditions:-10 to 45 deg C
- Dimensions 18.15×20.18×9.77
Servo types:
- 152-33 1520 frequency 333hz
- Futaba 9253,9254,9650,9257,3153
- JR 8900,3400,3500
- Align,510,520,610,620
- Logictech 3100
- 76-33 760 frequency 333Hz
- Futaba 9251, 9256, BLS251
- 152-25 1520 frequency 250Hz
- JR 8700, 2700
- Futaba 3154
PROGRAMMABLE SETTINGS:
Mid-trim
This is to fine tune the servo neutral point
Left limit- default 160
Works best when settings are between 160-230 if higher move your ballout or use a longer servo horn. Keep right limit with in +-20
If lover than 160 move ball in
Right limit
Same as left limit
Right piro gain
Default 100
Higher the setting, harder the breaking in piro stops
If the tail bounces lower the gain. If the servo bounces this will decrease servo life.
Left piro gain
Default 100
Same as right piro gain
Rudder gain
Default 100
Higher the gain re more sensitive the stick movement.
Accelleration curve
Default 0
Higher the value the smoother and longer it takes to reach piro speed
from static
Deceleration curve
Default 0 higher the value the longer it takes for the tail to slow down.
Dead band
Default 5
Rudder has no responce is stick is in the deadband zone.
This will stop unintentional rudder stick commands.
Normal rudder curve
Default -50
Normal gyro expo curve to the stick movement in non heading lock mode.
AVCS rudder curve
Default -50
AVCS expo curve to stick movements in heading hold mode.
Mas info proximamente aqui:
http://www.cyclonerc.com/