Colabora en el mantenimiento de helicopterosrc.net Leer una vez registrados (NUEVAS NORMAS, OBLIGATORIO LEER..) /// Nuevo anexo Normas Compra/Venta
Rabbit II Flight Control with High-precision Barometer & Digital Compass for Quadcopter Multicopter (New Upgrade Version)- Auto Stability,3D Stunt, Height Lock, Head Lock, Care Free(CF),PTZ Stability,Autolanding With the GPS model for founction: Go home ,Position Hold.- Rabbit Flight Controller adopts 32 Digits ARM CPU and latest new sensor with Independent research and development software, ensuring stable and reliable flight in a simple setting surface.- The board contains high precision tri-axis gyroscope and tri-axis accelerometer with compactstructure and size.- With Autostability & 3D stunt function without any additional board.- Multi-function: Can be connected with ultrasonic, Barometer,tri-axis magnetic sensor,GPS model,and to realize the founction such as Height Lock,Head Lock, CareFree(CF),Autolanding.Go home,Position hold etc.- 8 Channel PWM remote and 10 Channel output for motor/servo- Support PTZ Autostability.Output mode can be set by user. 7. With USB interface, Upgrades PC and adjusts parameters without Expansion Board. 8. With PC tools to upgrade the Fireware .Features(compare with Rabbit flight control 1):- 32 digits 72 MHZ CPU- 10 channel 16 digits output channel,Support 10-axis or 8-axis+2axis camera gimbal,can set 50Hz~500Hz analog/didital servo or non- standard ESC singal.- Max support 10-axis,with various port,support bluetooth,telemetry,ground station,OSD,Serial port,IIC device and so on- with large power sound and light alarm- with compact protection coverOther Features:- Support 140g mini quadcopter.- Support Hexcopter,Octacopter,FPV Multicopter and so on- With high precision tri-axis gyroscope and tri-axis accelerometer with compact structure and size- 8 CH recieve channel, can set Auxiliary switch channels and PTZ control channel- 10 channel 16 digits output channel,Support 10-axis or 8-axis+2axis camera gimbal,can set 50Hz~500Hz analog/didital servo or non- standard ESC singal.- Supports mix-control: GIM-BAL,BI,TRI,QUADP,QUADX,Y4,Y6,HEX6,HEX6X,OCTOX8,OCT OFLATP,OCTOFLATX,FLYING_WING,FIEXD WIND mode and so on. can be add other mode according to users requirement.- Provides PC tools to upgrade the fireware , convienent for users to set parameter,and download the new fireware.- Supports quad-axis, hex-axis,eight-axis quadcopter( can not connect to PTZ as all the pins used to connect motor)- 8 LED singal to indicate various mode, convinient to set parameters anytime even for a tiny adjust-ment. Can connect color LED strip, makes magnificant and unique night flight.- Supports 4S battery Voltage test, avoid overdischarge.- Provide alarm port,facilitate users to set low power alarm, the warning tone will be more pressing as the power lower and lower.- With ultrasonic port, makes fixed hight function range 2 meters, perfect performance especially for the ground grading.- With equipment selfcheck function, make sure safty flight . with sound and light signal in the self-check procedures.- With high precision tri-axis gyroscope and tri-axis accelerometer,facilitate users to add functions such as Automatic landing and Fixed-point return.(just buy additional board and download online upgrade software is ok)- With Independent research and development software, can improve or add new functions as user's requirements.- Optinal output mode: Default ESC output 330MHZ.47HZ servo output, Servo/ESC output op-tion:50Hz(20ms);100Hz(10ms);270Hz(3.6ms);330Hz(3ms );500Hz(2ms Special ESC);2KHz PWM(Special ESC)- With the function: Auto Stability, 3D stunt,Height Lock,Head Lock, PTZ Stability, Autolanding, CareFree(CF)- With the GPS model ,It can realize the founction: Go home, Position hold etc.Specifications:- Alarm Voltage setting: 2.8VV~4.0VV- Gyroscope: +-2000dps,16 digits resolution ratio, responding time:1000HZ- Accelerometer: -8G,14 digits resolution ratio, responding time:800Hz- Digital Compass:+- 1 deg- LED output:0-3V TTL,8mAh/channel- Mounting hole:45x45mm- Input Voltage: 4~6V (provides by ESC)- Board Szize: 5.5mmX5.5mm- Weight: 24g- working temperature:-10~-85 C