Ha salido una nueva versión de la rabbit la
1205 pero OJO
No se recomienda actualizar a los usuarios de ESC flasheados. esto no se porque la verdad a ver si me entero porque para los que tenemos los ESC flasheados puede ser un gran fastidio.
Aqui la lista de cambios
1. improved the way the fc determines "no throttle
stick movement" in order to enter "height lock"
mode
2. Unltrsonic height lock now works upto 2.5m. When
the rotor is climbing, HL will change over from
ultrasonic to baro at 2.5m, when decending,
changeover from baro to ultrasonic at 1.5m
3. correct the case when while releasing the sticks
for GPS position hold, the fc reacts as GO Home
sometimes
4. fine tuned the GPS Go Home speed
5. Resoved the problem that at times, while doing
the FW upgrade with battery plugged-in, the motor
would suddently start..
6 correct sometimes while not activated the GPS
position hold, the rotor's levelling is out...
It is too bad that the 500Hz ESC issue seems not be
addressed this time and some buddies in China
already got problem with the XA type ESC.. I would
suggest those working with these type of ESC don't
do the upgrade now until we understand more on this
problem
Descarga:
http://www.rcgroups.com/forums/showatt.php?attachmentid=4753177Un Saludo.